SI-65

    LAN⇔RS-422/RS-485 Conversion

    Supports 10Base-T/100 Base-TX, Built-in Xport

    *Environment-friendly design

    SI-65 is an interface converter to connect factory automation equipment and analyzers, which only have the serial communication ports for RS-422/485, to LAN.

    The built-in Lantronix Xport on the LAN interface converts RS-422/RS-485 data into LAN protocol (TCP/IP). It also transfers LAN data, controlling RS-485 driver automatically. It has the robust metal body and supports 35mm DIN rail.

    Therefore, you can use it for factory automation without worry.

    SI-65: Japanese model (100V Input AC adapter)

    SI-65-E: World wide model (Wide Input AC adapter)

·         Connects 10Base-T/100Base-TX by auto-detection.

·         Supports multi protocols such as TCP/IP, UDP/IP, ARP, ect.

·         Automatically controls RS-485 communications, which is available to use the flow control of XPort.

·         Able to control 125sets maximum in R-485 multi-drop type.

·         Can use in the workplace environments between -10 to 50 degree Celsius.

·         Solid, card-case sized, and metal enclosure.

·         Supports installation of 35mm DIN rail.

·         Environment-friendly design. Use lead-free solder. Non-use of chromium screw ect.

[Accessories]

AC Adapter: 1

Utility CD-ROM: 1

Instruction Manual: 1

Warranty: 1

[CASE]

Where SI series are used

                          <DIN Rail Installation Example>        <Optional "Metal Fitting for Wall">

“SILANIOinit” is a configuration tool for LINEEYE products embedded WiPort-NR.

            It is useful and saves time to rewrite the WiPort-NR configuration file (Setup Record).

            [Functions]

·         Searches the device on the Network. Displays the MAC address.

·         Reads and saves the configuration (set-up record) of converter.

·         Writes to the set-up record of selected converter.

·         Sets the IP address of selected converter.