• LLFA Tape R1-5-8AJP

LLFA Tape (RED)


        


     Specifications

R1-5-8AJP

Width (mm)

Length (mm)

Thickness (mm)

25.4

10.9

1

    ■ Performance data

   Temperature

   -90oC to +260oC

   Dielectric breakdown test

   Dielectric strength

   400VPM (15.748V/mm)

   At least 25000V at JIS C 2107-17

   Tear strength

   125 lbf/in (22.3kg/cm) or more

   Water absorption

   Less than 0.5%

   Growth rate

   More than 325%

   Tracking resistance

   Prevent electric conduction along its surface

   UV resistance

   High UV resistance

   Adhesion (fusion)

   Standard requirements: “The tape must not be relled back over 1.0 inch (25.4mm) after three minutes with a load of 600g applied”.

   Test results: LLFA tape = less than 1 inch (25.4mm)

   Thermal stability

   -90oC to +260oC continuous

   Tensile strength

   At least 1200 PSI (84.4kg/cm) throughout the temperature range

   Breaking strength

   15 pounds (6.8kg) or more

   Durometer hardness

   55-65

   Acid and alkali

   When exposed for a short time, it’s not adversely affected

   Can withstand immersion up to 3 days

   Corena nature resistance

   Since it closely wraps up the joint, minimize the space where the corona can exist

   Ozone resistance

   High ozone resistance

   Self-extinguishing property

   Compliance with IEEE383 flammability test.

   It has self-extinguishing properties and it does not spread widely.

   *IEEE383: International standrards also used for conformity testing cables for nuclear power plant.

   Prolonged year

   It works well continuously and mechanically for more than 40 years.

   (Data calculated from the results of the IEC61442 IEC60502-1 test after the test according to BSEN50393:2006).

    ■ Unevenness of fitting step and corrosion is also OK !!


   

    A special packed putty LLFA smoothly used like clay, smoothing steps and gaps makes it easy to apply to steps such as joint steps, screw threads and corrugations, and the construction range expands at a stretch.

    This unique system that uses putty together firmly fills the steps and gaps and demonstrates higher sealing performance.


    ■ Even if it is wet, “moment” self fusion !

    


    Even in a state wet with water, it fuses quickly and reliably, so repair work of Jagger leak can be done without panic.

    Excellent pressure resistance, practical 1 MPa (About 10kg/cm2), it can be constructed leaking.

    In addition, the LLFA tape has heat resistance from an ultra-low temperature of -90oC to a high temperature of 260oC (continuous), and it has a high extreme performance corresponding to repairing such as hot water supply and steam leakage.

     High spec that the insulation performance is also safe !

    

    It is also excellent in insulation performance and can be used for insulation processing up to 69kV.

    It carries out a demonstration test by a third party testing institution based on the domestic JIS standards and the overseas ASTM standards and provides a high-spec feeling of security together with self-extinguishing properties that passed the IEEE 383 combustion test.

     Various construction examples



Viết đánh giá

Lưu ý: không hỗ trợ HTML!
   Xấu           Tốt

LLFA Tape R1-5-8AJP

  • Mã sản phẩm:LLFA Tape R1-5-8AJP
  • Tình trạng:Còn hàng
  • 0₫

Tag: LLFA Tape R1-5-8AJP