Không có sản phẩm nào!
■ Specifications
R1-5-8AJP
Width (mm)
Length (mm)
Thickness (mm)
25.4
10.9
1
■ Performance data
Temperature
-90oC to +260oC
Dielectric breakdown test
Dielectric strength
400VPM (15.748V/mm)
At least 25000V at JIS C 2107-17
Tear strength
125 lbf/in (22.3kg/cm) or more
Water absorption
Less than 0.5%
Growth rate
More than 325%
Tracking resistance
Prevent electric conduction along its surface
UV resistance
High UV resistance
Adhesion (fusion)
Standard requirements: “The tape must not be relled back over 1.0 inch (25.4mm) after three minutes with a load of 600g applied”.
Test results: LLFA tape = less than 1 inch (25.4mm)
Thermal stability
-90oC to +260oC continuous
Tensile strength
At least 1200 PSI (84.4kg/cm) throughout the temperature range
Breaking strength
15 pounds (6.8kg) or more
Durometer hardness
55-65
Acid and alkali
When exposed for a short time, it’s not adversely affected
Can withstand immersion up to 3 days
Corena nature resistance
Since it closely wraps up the joint, minimize the space where the corona can exist
Ozone resistance
High ozone resistance
Self-extinguishing property
Compliance with IEEE383 flammability test.
It has self-extinguishing properties and it does not spread widely.
*IEEE383: International standrards also used for conformity testing cables for nuclear power plant.
Prolonged year
It works well continuously and mechanically for more than 40 years.
(Data calculated from the results of the IEC61442 IEC60502-1 test after the test according to BSEN50393:2006).
■ Unevenness of fitting step and corrosion is also OK !!
A special packed putty LLFA smoothly used like clay, smoothing steps and gaps makes it easy to apply to steps such as joint steps, screw threads and corrugations, and the construction range expands at a stretch.
This unique system that uses putty together firmly fills the steps and gaps and demonstrates higher sealing performance.
■ Even if it is wet, “moment” self fusion !
Even in a state wet with water, it fuses quickly and reliably, so repair work of Jagger leak can be done without panic.
Excellent pressure resistance, practical 1 MPa (About 10kg/cm2), it can be constructed leaking.
In addition, the LLFA tape has heat resistance from an ultra-low temperature of -90oC to a high temperature of 260oC (continuous), and it has a high extreme performance corresponding to repairing such as hot water supply and steam leakage.
■ High spec that the insulation performance is also safe !
It is also excellent in insulation performance and can be used for insulation processing up to 69kV.
It carries out a demonstration test by a third party testing institution based on the domestic JIS standards and the overseas ASTM standards and provides a high-spec feeling of security together with self-extinguishing properties that passed the IEEE 383 combustion test.
■ Various construction examples
0 đánh giá / Viết đánh giá
Tag: LLFA Tape R1-5-8AJP
